PeakTech 4965 Bedienungsanleitung Seite 22

5.3. Data Hold
This meter automatically holds the last temperature reading on
the LCD for 7 seconds after the ON/HOLD (8.) key is released.
No extra key presses are necessary to freeze the displayed
reading.
5.4. MIN/MAX- Function
1. To activate the minimum value holding function, or the
maximum-hold function, press ON/HOLD - button.
2. MIN/MAX - key until the desired setting appears in the
display.
3. ON/HOLD - press to display a reading.
5.5. Backlite LCD
Select backlite by first pressing the ON/HOLD (8.) key and then
pressing the BACKLITE (6.) key. Press the backlight key again
to turn the backlight OFF.
5.6. Laser Pointer
1. To turn the laser pointer ON, press the LASER (7.) key after
pressing the ON/HOLD (8.) key.
2. Press the Laser key again to turn the laser OFF.
-21-