Installing Add-In Cards - Fujitsu D3348 Handbuch

Mainboard D3348

Installing Add-In Cards

Before installing add-in cards, please check if they are fully compatible with your motherboard.
SLOT7 PCIe x4 (Gen3)
SLOT6 PCIe x16 (Gen3)
SLOT5 PCIe x4 (Gen2)
SLOT4 PCIe x4 (Gen3)
SLOT3 PCIe x16 (Gen3)
SLOT2 PCIe x1 (Gen2)
SLOT1 PCIe x1 (Gen2)
Simply find the appropriate slot for your add-in card and insert the card firmly. Do not force any add-
in cards (or anything else) into any slots if they won't seat in place. It's better to try another slot or
return the faulty card rather than damaging both the motherboard and the add-in card.
It's a good practice to install add-in cards in a staggered manner, rather than directly
i
adjacent to each other. This allows air to more easily circulate within the chassis, providing
improved cooling for all installed devices.
You must unplug the power connector to the motherboard before performing system
!
hardware changes, to avoid damaging the board or expansion device.
Fujitsu
English - 31
67