The "Settings" Menu - roco Z21 Benutzerhandbuch

Menus
3. The "SETTING" Menu
The most extensive WLANmaus menu contains all the data which is practical, useful or sometimes
necessary for basic operation of the WLANmaus. We would also like to point out at this point that the
WLANmausis provided with all the necessary settings in the factory so that you have to use this main
menu either rarely or not at all.
3.1 "DISPLAY"
This is where you find the setting options which affect the display screen.
3.1.1 The sub-item "BACKLIGHT" regulates the strength of the backlight of the display screen which
can be particularly useful in dark rooms. you select the desired strength using the arrow keys.
Value range: 0 (off) – 15, Factory setting: 8
▪
To confirm the input, press OK-key. you return to the start level "BACKLIGHT."
3.1.2 you use the second sub-item "CONTRAST" to regulate the contrast of the display screen. you
also select this value using the arrow keys.
Value range: 0 (very weak) – 15 (very dark), Factory setting: 12
▪ To confirm the input, press OK-key. you return to the start level "CONTRAST."
3.1.3 The "TIME" indicates how long the display is illuminated. To save power, the factory setting
switches the backlight off after 10 seconds. use the arrow keys to select a different value:
Value range: 0 (backlight permanently off) – 255 seconds– always on
Factory setting: 20 seconds
▪ Confirm input with OK-key. you are returned to the "TIME" start level.
3.2 "USERINTERFACE"
you can make individual operating settings for the WLANmaus here.
3.2.1 Another language for the menu navigation is selected using the "LANGuAGE" submenu.
Select your language using the arrow keys. If your national language is not included, visit the
ROCO website "www.roco.cc" for an update.
▪ To confirm, press the OK-key. you return to the start level "LANGuAGE."
3.2.2 The "MENu-KEy-TIME" is the amount of time you have to press the MENu-key in order to exit
drive mode and access menu mode on the WLANmaus. you can set the duration you require
in seconds using the arrow keys.
Value range: OFF, 1– 10, Factory setting: 5
If the value is set to "OFF", you can only access the WLANmaus menu mode by pressing the
-key and the MENu-key at the same time.
▪
To confirm, press the OK-key. you return to the start level "MENu-KEy-TIME."
3.2.3 The "FuNCTION KEyS" are used to activate locomotive functions (F1– F28, e.g. the horn on
a locomotive with sound or a digital coupling) by pressing the corresponding function key for
an extended time (at least 1 second). The function remains active for as long as you hold the
Function Key. If you press the key only briefly, the desired function is activated normally.
you select the desired status using the arrow keys.
Factory setting: OFF
▪ To confirm, press the OK-key. you return to the start level "FuNCTION KEyS."
62
62
8010813920.indd 62 13.07.2017 10:27:50