Connecting The Battery - EMAK ELV63 Gebrauchsanweisung

3.3 FITTING
THE SEAT
Fit the seat (1) onto the
plate (2) using the
3
screws (3).
3.4 FITTING
THE BLADE
ENGAGEMENT
LEVER
Fit the end of the lever
(1) on the projecting
part of the pin (2) and
fix it all by tightening
the screw (3) and nut
(4).
EN 10
2
3
1
4
3 2

3.5 CONNECTING THE BATTERY

Electric start
1. Position the battery (1) in its compartment under the
seat;
2. connect the battery connector (2) to the machine con-
nector (3);
3. fit the spring (4) to hold the battery in place;
1
4. recharge the battery by following the instructions in the
manual (
IMPORTANT
tery is fully charged!
WARNING!
instructions regarding safe handling and disposal.
6.2.3).
4 1
2 3
Never start the engine until the bat-
Follow the battery manufacturer's