EMAK ELV63 Gebrauchsanweisung Seite 88

safety conditions have not been complied with, the engine
shuts down and cannot be restarted (
– In disengaging the blade (Pos. «A»), a brake is simultane-
ously activated which stops their rotation within a few sec-
onds.
Electric start
4.11 KEY IGNITION SWITCH
This key operated control has three positions:
«OFF» everything
is switched off;
«ON» activates all parts;
«START» engages the starter
motor.
On being released at the «START» position, the key will
automatically return to «ON».
4.12 ACCELERATOR LEVEL
Regulates the engine's r.p.m. The
positions are indicated on a plate
showing the following symbols:
«CHOKE» (if fitted)
= cold starting
EN 14
5.2).
4.11
4.12
«SLOW» for minimum engine speed
«FAST» for maximum engine speed
– The «CHOKE» position (if fitted) enriches the mixture so
must only be used for the necessary time for cold start-
ing.
– When moving from one area to another, put the lever in a
position between «SLOW» and «FAST».
– When cutting, go to the «FAST» position.
Manual start
4.21 PULL START HANDLE
To start the engine, take the starter cable handle and give it
a firm tug.
Then put the handle back in its seat, guiding the cable as it
automatically rewinds.
4.22 ACCELERATOR LEVEL
It regulates the rpm and stops
the engine.
The positions are indicated on
the plate showing the following
symbols:
«OFF» for switching off
the engine
4.21