Maintenance; Safety Recommendations; Routine Maintenance - EMAK ELV63 Gebrauchsanweisung

6. MAINTENANCE

6.1 SAFETY RECOMMENDATIONS

WARNING!
Disconnect the spark plug cap,
remove the key (in the electric start models) or shift the
accelerator lever to «OFF» (in the manual start models)
and read the relevant instructions before starting any
cleaning, maintenance or repairs. Wear suitable clothing
and strong gloves for dismantling and refitting the blade
and in all other hazardous situations for the hands.
WARNING!
Never use the machine with worn or
damaged parts. Faulty or worn-out parts must always be
replaced and not repaired. Only use original spare parts:
The use or non-original and/or incorrectly fitted parts
will compromise the safety of the machine, may cause
accidents or personal injuries for which the
Manufacturer is under no circumstance liable or respon-
sible.
IMPORTANT
Never get rid of used oil, fuel or other
pollutants in unauthorised places!
WARNING!
Any adjustments or maintenance
operations not described in this manual must be carried
out by your Dealer or a specialized Service Centre. Both
have the necessary knowledge and equipment to ensure
EN 26
that the work is done correctly without affecting the
safety of the machine.
You must go to a specialised Service Centre or contact
your Dealer if the following are malfunctioning:
– the brake;
– the engagement and stop of the blade;
– the drive engagement in forward and in reverse gears.

6.2 ROUTINE MAINTENANCE

6.2.1 Engine
Follow all the instructions
in the engine manual.
To drain the engine oil:
1. unscrew the topping up
cap (1);
2. fit the pipe (2) onto the
syringe (3) and insert it
right into the hole;
3. using the syringe (3),
suck up all the engine
oil, bearing in mind that
you need to repeat this
operation a few times
before all the oil is
removed.
1 3
2