EMAK ELV63 Gebrauchsanweisung Seite 107

PROBLEM
10. Unusual vibrations while working
11. The blade does not engage or does not stop
promptly when it is disengaged
12. Uncertain or ineffective braking
13. Erratic forward movement, poor drive when going
uphill or if the machine has a tendency to rear up
If problems continue after having carried out these operations, contact your dealer.
WARNING!
Do not take on complicated repair work if you don't have the necessary equipment or the techni
knowledge. The warranty is automatically voided and the manufacturer is not held responsible if repairs are done
badly.
LIKELY CAUSE
– cutting deck not parallel to the ground
– blade cutting badly
– forward speed too high compared to height
of grass
– collector channel is blocked
– cutting deck full of grass
– blade unbalanced
– blade loose
– fixing bolts loose
– problems with the engagement system
– the brake is not adjusted correctly
– problems with the belt or the engagement
device
SOLUTION
– realign the cutting deck to the ground
( 6.3.12)
– Contact your dealer
– reduce forward speed and/or raise the cutting
deck ( 5.4.5)
– wait for the grass to dry
– remove the grass-catcher and empty
the collector channel ( 5.4.7)
– clean the cutting deck ( 5.4.10)
– Contact your dealer
– Contact your dealer
– check and tighten all the fixing bolts
of the engine and frame
– Contact your Dealer
– Contact your Dealer
– Contact your Dealer
cal
EN 33