SCHUNK Vero-S NSL mini 100-2 Betriebsanleitung Seite 28

Translation of original EC declaration of incorporation
In terms of the EC Machinery Directive 2006/42/EC, annex II, Part B
Manufacturer/
distributor
We hereby declare that the following product:
Product designation
Type designation:
ID numbers:
meets the applicable basic requirements of the Directive Machinery (2006/42/EC).
The incomplete machine may not be put into operation until conformity of the machine into which
the incomplete machine is to be installed with the provisions of the Machinery Directive (2006/42/EC)
is confirmed.
Applied harmonized standards, especially:
EN ISO 12100-1
EN ISO 12100-2
The manufacturer agrees to forward on demand the special technical documents for the incomplete
machine to state offices.
The special technical documents according to Annex VII, Part B, belonging to the incomplete
machine have been created.
Person responsible for documentation: Mr. Robert Leuthner. Adress: see manufacturers adress
Location, date/signature:
Title of the signatory
EC declaration of incorporation
H.-D. SCHUNK GmbH & Co. Spanntechnik KG.
Lothringer Str. 23
D-88512 Mengen, Germany
Clamping Station
NSL mini
0435210 - 0435240
Safety of machinery - Basic concepts, general principles for design
Part 1: Basic terminology, methodology
Safety of machinery - Basic concepts, general principles for design
Part 2: Technical principles
Mengen, Germany, January 2012
Director for Development/Design
p.p.