Dmx Operation - EuroLite 51741077 Bedienungsanleitung

DMX operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 14 control channels.
However, it can also be switched to a mode with 2 channels if different functions are required. To be able to
operate the device with a DMX controller, the DMX starting address must be set for the first DMX channel.
The starting address depends upon which DMX controller is being used. Please refer to the controller's
documentation.
1 Press the MENU button so many times until Addr is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to set the address. Confirm with the ENTER button.
2 Press the MENU button so many times until the display indicates the DMX channel mode ChMd. Confirm
with the ENTER button. Use the buttons UP and DOWN to select the desired number of DMX channels.
Confirm with the ENTER button.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
DMX functions in 2-channel mode
Channel
1
2
DMX functions in 14-channel mode
Channel
Master control
1
RGBW color mix: if channel 1 is set to a value between 000-009
2
Show programs: if channel 1 is set to a value between 009-255
2
Value Function
000 – 009 No function
010 – 044
Show program 1: Derby
045 – 079
Show program 2: Strobe
080 – 114 Show program 3: Laser
115 – 149
Show program 4: Derby + Laser
150 – 184
Show program 5: Derby + Strobe
185 – 219
Show program 6: Laser + Strobe
220 – 255 Show program 7: Derby + Strobe + Laser
000 – 247 Program running speed slow > fast
248 – 255 Sound control
Value Function
000 – 009 No function
010 – 044 Show program 1: Derby
045 – 079
Show program 2: Strobe
080 – 114
Show program 3: Laser
115 – 149
Show program 4: Derby + Laser
150 – 184
Show program 5: Derby + Strobe
185 – 219
Show program 6: Laser + Strobe
220 – 255
Show program 7: Derby + Strobe + Laser
000 – 009 Blackout
Color selection (15) for the LEDs; each color takes up 15
010 – 198
DMX values
199 – 225 Single-color running light slow > fast
226 – 255 Multi-color running light slow > fast
Automatic show programs 1-7
000 – 247
Running speed slow > fast
248 – 255 Sound-controlled show programs 1-7
24/28 00112264, Version 1.0