Clock Functions - Zanussi ZOS35802 Benutzerhandbuch

Emptying the water tank
Important! Make sure that the appliance is
cool before you start to empty the water tank.
1. Prepare the draining pipe (C), included in
the same package with the user manual.
Put the connector (B) onto one of the ends
of the draining pipe.
A
B
C

Clock functions

Electronic programmer
1
5
Clock function
Time of day
Minute Minder
Duration
End
You can use Duration
the same time to set the time when the ap-
www.zanussi.com
2 1
4 3
To set, change or check the time of day.
To set a countdown time. This function has no effect on the operation of
the oven.
To set how long the appliance must operate.
To set when the appliance must be deactivated.
and End at
2. Put the second end of the draining pipe
(C) into a container. Put it at a lower posi-
tion than the outlet valve (A).
3. Open the oven door and put the connector
(B) into the outlet valve (A).
4. Push the connector again and again when
you empty the water tank.
5. Remove the connector from the valve when
the water stops flowing.
Warning! Do not use the drained water to
fill the water tank again.
The tank can have some water when the
Tank Empty indicator
the water flow from the water outlet valve stops.
Function indicators
1
Time display
2
Button +
3
Selection button
4
Button -
5
Application
pliance must be activated and then deactivated.
First set Duration
is on. Wait until
, then End .
7