Clock Functions - Zanussi ZOHEA3X1 Benutzerhandbuch

CLOCK FUNCTIONS

CLOCK FUNCTIONS
Clock function
Time of Day
Duration
Minute Minder
HOW TO SET: CLOCK FUNCTIONS
- flashes when you connect the oven to the electrical supply, when there was a power cut or when
the timer is not set.
Step 1
- press repeatedly.
Step 2
,
After approximately 5 sec., the flashing stops and the display shows the time.
- press repeatedly to change the time of day.
Step 1 Set an oven function and the temperature.
Step 2
- press repeatedly.
Step 3
,
The display shows:
- flashes when the set time ends. The signal sounds and the oven turns off.
Step 4 Press any button to stop the signal.
Step 5 Turn the knobs to the off position.
Step 1
- press repeatedly.
10
To set, change or check the time of day.
To set how long the oven works.
To set a countdown. This function has no effect on the operation of
the oven. You can set this function at any time, also when the oven
is off.
How to change: Time of Day
- starts to flash.
- press to set the time.
How to set: Duration
- starts to flash.
- press to set the duration.
.
How to set: Minute Minder
- starts to flash.
Application
- starts to flash.