_________________________________________________________________________________________
5
Servicing, cleaning, maintenance
No special servicing is required, the spindle unit is protected by the carriage construction.
Apply machine oil to the carriage surfaces at regular intervals.
e.g. with MOTOREX Supergliss 68 K lubricant to ISO VG 68.
Remove the clamping jaw at regular intervals and grease the thread with machine grease.
5.1 General cleaning / lubrication
6
Troubleshooting, eliminating faults
Vice is hard to operate:
Dismantle and clean, and carefully remove any dented or uneven areas with a honing stone.
www.schunk.de
Release stop screw (pos. 80)
Turn the spindle (pos. 40) until
the carriage (pos. 20) is released
Lubricate the thread
Oil the spindle head
Oil the contact surfaces
XND.00014.008_A - 08/2016
20