Use And Operation - Klarstein 10028328 Anleitung

Turning On the Appliance
1. Draw out the lower and upper basket, load the dishes and push them back.
2. Pour in the detergent.
3. Insert the plug into the socket and make sure that the water supply is turned on to full pressure.
4. Press the program button, the wash program will be changed as follows direction: Eco > Glass > 60 min >
Rapid > Soak > Auto > Intensive > Normal.
5. If a program is selected, the response program indicator will light, then you can also choose the Extra Drying
or Express function, close the door ,the dishwasher will begin work after about 10 seconds.
Change the program
A cycle that is underway can only be modified if it has only been running for a short time. Otherwise the
detergent may have already been released, and the appliance may have already drained the wash water. If this
is the case, the detergent dispenser must be refilled.
• Open the door, the machine will be in standby state, press the program button more than 3s then you can
change the program to the desired cycle setting.
The front indicator show the state of dishwasher:
• Blue light with blinking: running.
• Blue light without blinking: pause.
• White light: end of process(open the door ,the white light will extinguish).
• No light: stand by.
NOTE: If you open the door , the machine will pause. The program light will stop blinking and the buzzer will mooing
every minute unless you close the door . After you close the door, the machine will keep on working after 10 seconds.
Add forgotten dish
You can addd dish, when the dishwasher just runs for a short time.
1. Press the Start/Pause button. Open the door a little to stop the washing.
2. Nachdem die Sprüharme angehalten haben können Sie die Tür komplett öffnen.
3. After the spray arms stop working,you can open the door completely.
4. Add forgotten dishes, close the door and press the button, the dishwasher will run after 10 seconds.
At the end of the Wash Cycle
When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off
the appliance using the Power switch button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are
still hot and more susceptible to breakage. Empty the lower basket first and then the upper one. This will avoid
water dripping from the upper Basket onto the dishes in the lower one.
37

Use and Operation