Putting Into Storage - Gardena 8886 Betriebsanleitung

Change Shears Set of
Blades:
w

6. Putting into Storage

Storage / Overwintering:
Disposal:
(in accordance with
RL2002/96/EC)
Disposal of
batteries:
ClassicCut
8885-20.960.03.indd 17 8885-20.960.03.indd 17
Please only use original GARDENA Accu Shears Cutting
Blades.
• Grass+Boxwood-Blade Set cutting width 8 cm
• Shrub-Blade Set
• Shrub Blade Set
1. Press both lock buttons
blade set
t
2. If necessary clean transmission chamber and lubricate gear
wheels with some acid-free grease (Vaseline).
3. Place the shear blade set
the groove
audibly engaged.
r
4. If necessary, spray the shear blades with Cleaning Spray
Art. 2366. This increases the running time.
When first switching on after changing the blade set, there can be
an audible click when the cam engages with the the shear blade
e
connecting link.
Store your Accu Shears out of the reach of children.
1. Charge battery. This increases the life of the battery.
2. Clean Accu Shears and shear blade with GARDENA Cleaning
Spray Art. 2366 (see 7. Maintenance).
3. Slide blade protection onto the shear blade.
4. Store Shears in a cool, dry place where they are protected from
frost.
The product must not be added to normal household waste.
It must be disposed of in line with local environmental regulations.
The GARDENA Accu Shears contains lithium-ion cells that should
not be discarded with normal household waste at the end of their
life.
Li-ion
Please return the lithium-ion cells to your GARDENA dealer or
dispose of them properly at a public recycling centre.
z
1. Discharge lithium-ion cells
completely.
2. Remove lithium-ion cells
from the Accu Shears.
3. Dispose of lithium-ion
z
cells properly.
cutting length 12.5 cm Art. 2342
cutting length 18 cm
w
at the same time, flip up shear
e
and remove.
e
with the snap-in lug
t
and snap shut until both lock buttons
z
ComfortCut
Art. 2340
Art. 2343
r
into
w
have
z
17
28.02.11 08:23 28.02.11 08:23