Handling; Display Elements; Pushbuttons; Connections - GREISINGER GMH 5130 Betriebsanleitung

H82.0.01.6C-03

4 Handling

4.1 Display elements

4.2 Pushbuttons

4.3 Connections

Operating Manual GMH 5130
_____________________________________________________
1 Main display:
Secondary display: display of minimum / maximum /
2
3 Arrows for selected measuring unit
Rating of battery status
4
Display elements to show minimum / maximum / memorized
measuring value as well as tare-function and sea-level-
5
correction
user arrow: measuring value is shown in freely adjustable
6
user-unit (please refer to chapter 7.1)
corr arrow: zero-point or slope correction is active
7
On / off key, backlight
press shortly: activate backlight or switch on instrument
press longer: switch off instrument
set / menu:
press for 2 sec. (menu): invoke configuration menu
min / max:
press shortly:
press for 2 sec: the corresponding value is deleted
press shortly:
press for 2 sec: deactivate tare-function
store / enter:
hold and save current measuring value („HLD‟ is displayed)
(Set/Menu: confirm settings, return to measuring)
Universal output: interface, supply, analog output
(p.r.t. chapter 8)
7-pole bayonet connector: connection for sensor
_____________________________________________________________________________
measuring value
memorized measuring value
min. or max. value is displayed
tare-function: display is set to 0. All measuring
values are displayed relatively to this set tare-
value from now on.
page 5 of 14