Operation; Cleaning And Maintenance; Technical Specifications - EuroLite DPX-610 MP DMX Bedienungsanleitung

In order to connect the device to the mains, you have to install a power supply cable and a power-plug.
The occupation of the connection-cables is as follows:
Cable Pin
Brown Live
Blue Neutral
Yellow/Green Earth
The earth has to be connected!
Connect the device to the mains with the power-plug.
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.

6. OPERATION

After you connected the device to the mains, the DPX-610 MP DMX is ready for use.

7. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
If the fuse interrupts, please reset the breaker.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.

8. TECHNICAL SPECIFICATIONS

Power supply:
Max. power output:
Max. current:
Number of control-channels:
Max. output/channel:
Max. current/channel:
Integrated programs:
Output sockets:
Fuse:
Dimensions (WxDxH):
Minimum mounting depth:
Weight:
Please note: Every information is subject to change without prior notice. 08.08.2005 ©
International
L
N
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
13800 W
60 A
6
2300 W
10 A
12
two 16-pin sockets
6 x F 10 A, 230 V
443 x 482 x 95 mm
19" mounting dimensions with 2 u
160 mm
10 kg
19/32 70064125.DOC