Description; Features - EuroLite DPX-610 MP DMX Bedienungsanleitung

This device must never be operated or stockpiled in sourroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device. The room must only be
saturated with an amount of smoke that the visibility will always be more than 10 meters.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

4. DESCRIPTION

4.1 Features

Digital 6-channel dimming pack
• Universal dimming pack for professional use
• Can be operated 1-phase or 3-phase
• 6 x 10 A
• DMX-control or analogue control possible
• The DMX-starting address can be adjusted on the device
• Synchronisation of several DPX-610 MP DMX possible via DMX
• Adjusting the lamp pre-heat
• All modes are displayed via LEDs and the display
• With automatic circuit breaker per channel
• Display of internal temperature and automatic fan-control if overheated
• Outputs via two industrial sockets
16/32 70064125.DOC