Herunterladen Inhalt Inhalt Diese Seite drucken

Delivery Specifi Cations - Storch HPM 3000+ Bedienungsanleitungen

Feuchtigkeitsmesser für taupunkt, mauerwerk, holzfeuchte
Vorschau ausblenden Andere Handbücher für HPM 3000+:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Thank you
for your confi dence in STORCH. You have chosen a quality product with this purchase.
However, if you should have any suggestions for improvement or perhaps a problem, then we would be pleased
to hear from you. Please speak to your area representative or in urgent cases you can contact us directly.
Yours sincerely,
STORCH service department
Phone +49 (0) 2 02 .49 20 - 112
Fax
+49 (0) 2 02 .49 20 - 244
Contents
Scope of delivery
Safety Precautions
Initial operation
Display explained
Carrying out measurements
Troubleshooting
Technical specifi cations
1. Delivery specifi cations
Dew Check dew point and temperature sensor, instruction manual
2. Safety precautions, utilisation and disclaimer
Read and pay close attention to the instructions and information contained in the instruction manual in
order to ensure safe utilisation.
The Dew Check sensor fulfi lls the applicable standards of European and national guidelines and has been
constructed in accordance with state of the art technology. Read and pay close attention to the instruction
manual in order to ensure safe utilisation.
Devices exhibiting any technical defects should not be used.
If there are any doubts with regard to the operating reliability of the instrument, then it should be returned to
the manufacturer for examination.
The determined measurement results and all conclusions are exclusively the responsibility of the user. No
liability is assumed in any case for any damage which may arise from the use of the equipment or the deter-
mined results.
Avoiding measuring errors
The Dew Check must always be adjusted to the ambient temperature or climatic conditions of
the environment. Before starting measurements, the Dew Check sensor and HPM 3000 must
be in the environment to be measured + approx. 5 min.
Caution!
Ensure that the measuring sensor is not covered during the measuring process. Hold the Dew
Check on the handle provided for this during the measuring
process.
Caution!
Page
26
26
27
28
28-29
29
30
26

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis