Product Description And Specifications; Intended Use; Product Features - Bosch 0 607 595 100 Originalbetriebsanleitung

OBJ_BUCH-2097-001.book Page 13 Thursday, December 19, 2013 2:19 PM
The risk of disease depends on how often you are exposed to
these substances. To reduce the risk, you should work only in
well ventilated rooms with appropriate protective equipment
(e. g. with specially designed respirators that filter out even
the smallest dust particles).
 By working with certain materials, dusts and vapours
can form, which can create an explosive atmosphere.
By working with pneumatic tools, sparks can be produced,
which can ignite the dust or the vapours.
 When working on the workpiece, additional noise can
develop, which can be avoided through appropriate
measures (e. g. by using damping materials on occur-
rence of ringing noise from the workpiece).
 When the pneumatic tool is equipped with a silencer,
always ensure that it is available and in proper working
condition when operating the pneumatic tool.
 Vibration effects may cause damage to the nerves and
blood circulation disorders in the hands and arms.
 If you notice that the skin of your fingers or hands be-
comes numb, tingles, hurts or turns white, stop work-
ing with the pneumatic tool, notify your employer and
consult a physician.
 Hold the pneumatic tool with a not too firm yet secure
grip, compliant with the required hand-reaction forces.
The vibrations can be intensified the firmer you hold the tool.
 When universal rotary couplings (bayonet couplings)
are being used, retaining pins are required. Use Whip-
check hose restraints to protect against failed hose
connections or the connection between hose and pneu-
matic tool.
 Never carry the pneumatic tool by the hose.
Symbols
The following symbols could have a meaning for the use of your
pneumatic tool. Please take note of the symbols and their
meaning. The correct interpretation of the symbols will help
you to use the pneumatic tool in a better and safer manner.
Symbol Meaning
 Before installing, operating, re-
pairing, maintaining and replacing
accessories as well as prior to
working near by the pneumatic
tool, please read and observe all in-
structions. Failure to follow the fol-
lowing safety warnings and instruc-
tions may result in serious injury.
 Wear safety goggles.
W Watt
Nm Newton metre
Bosch Power Tools
Symbol
kg
lbs
mm
min
s
-1
min
bar
psi
l/s
cfm
dB
G
NPT
Product Description and
Specifications
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.

Intended Use

The pneumatic tool is intended for cutting foam plastics, foam
rubber and similar materials.

Product Features

The numbering of the product features refers to the illustra-
tion of the pneumatic tool on the graphics page.
1 Hose fitting
2 On/Off switch (lever)
3 Saw blade guide*
4 Base plate
5 Saw blade pair*
6 Knurled screw
7 Cover plate
8 Screw
9 Tensioning screw for base plate
10 Connection socket at air intake
11 Hose clamp
12 Supply-air hose
*Accessories shown or described are not part of the standard de-
Power output
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Unit of energy
(torque)
Meaning
Kilogram
Mass, weight
Pounds
Millimetre Length
Minutes
Time period, dura-
tion
Seconds
Revolutions or motions
No-load speed
per minute
bar
Air pressure
pounds per square inch
Litres per second
Air consumption
cubic feet/minute
Unit of relative
Decibel
loudness
Whitworth thread
Connecting thread
National pipe thread
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
3 609 929 C90 | (19.12.13)
English | 13