Product Description And Specifications; Intended Use; Product Features - Bosch GST 18V-155 SC Professional Originalbetriebsanleitung

Use only undamaged saw blades that are in perfect
u
condition. Bent or dull saw blades can break, negatively
influence the cut, or lead to kickback.
Do not brake the saw blade to a stop by applying side
u
pressure after switching off. The saw blade can be dam-
aged, break or cause kickback.
Only use the power tool with the base plate. If you do
u
not use the base plate, you are at risk of not being able to
control the power tool.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Caution! When using the power tool with Bluetooth
u
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
®
Bluetooth in aircraft. Avoid using the product near
your body for extended periods.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Bosch Power Tools
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates, rubber and
laminate/HPL (High Pressure Laminate) while resting firmly
on the workpiece. It is suitable for straight and curved cuts.
The saw blade recommendations are to be observed.
With the built-in Bluetooth® Low Energy Module, power tool
data and settings are transferred between the power tool
and a mobile device by means of Bluetooth® wireless techno-
logy.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle (insulated gripping surface)
(2) User interface
(3) Smartphone indicator (user interface)
(4) ASC indicator (user interface) (GST 18V‑155 SC)
(5) Power tool status indicator (user interface)
(6) Worklight indicator (user interface)
(7) Worklight button (user interface)
(8) Stroke rate level indicator (user interface)
(9) Stroke rate preselection button (user interface)
(10) Rechargeable battery
(11) Rechargeable Battery release button
(12) Extraction outlet release button
(13) Base plate
®
, a
(14) Plastic guide plate
(15) Saw blade guide
(16) Saw blade
(17) Safety guard
®
in the vicinity of
(18) Saw blade receptacle
(19) SDS lever for saw blade release
(20) Worklight
(21) On/off switch
(22) Orbital action adjusting lever
(23) Sawdust blower device switch
(24) Saw blade guide adjustment opening
(25) Lock-off button for on/off switch
(GST 18V‑155 BC)
(26) Hex key
(27) Anti-splinter guard
(28) Hood for dust extraction
(29) Extraction outlet
(30) Extraction hose
(31) Guide for parallel guide
(32) Locking screw for parallel guide
English | 19
a)
a)
a)
a)
1 609 92A 6Y3 | (27.07.2022)