Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch 0 607 561 118 Originalbetriebsanleitung

OBJ_BUCH-2096-001.book Page 17 Monday, December 9, 2013 3:45 PM
Symbol Meaning
 Wear safety goggles.
W Watt
Nm Newton metre
kg Kilogram
lbs Pounds
mm Millimetre
min Minutes
s Seconds
Revolutions or motions per
-1
min
minute
bar bar
psi pounds per square inch
l/s Litres per second
cfm cubic feet/minute
dB Decibel
G Whitworth thread
NPT National pipe thread
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.

Intended Use

The pneumatic tool is intended for making separating cuts
and cut-outs in wood, plastic, metal, ceramic plates and rub-
ber while resting firmly on the workpiece. It is suitable for
straight and curved cuts with mitre angles of up to 45°. The
saw blade recommendations are to be observed.

Product Features

The numbering of the product features refers to the illustra-
tions on the graphics page. The illustrations are partly sche-
matic and may differ from your pneumatic tool.
1 Saw blade
2 Guide roller
3 Stroke rod
4 Contact protector
5 Rotatable top handle with pushbutton
6 On/Off switch
Bosch Power Tools
7 Connection socket at air intake
8 Hose fitting
9 Air outlet with silencer
10 Allen key
11 Adjusting lever for orbital action
12 Base plate
Power output 13 On/Off switch (lever)
14 Hose clamp
Unit of energy
(torque)
15 Supply-air hose
16 Exhaust-air hose
Mass, weight
17 Exhaust-air hose, central
18 Positioning pin/mark
Length
19 Scale for mitre angle
Time period,
20 Screw
duration
21 Angle gauge**
No-load speed
22 Bolt hole
23 Parallel guide with circle cutter*
Air pressure
24 Locking screw for parallel guide*
25 Lead for the parallel guide
Air consumption
26 Centring tip of the circle cutter*
27 Splinter guard*
Unit of relative
*Accessories shown or described are not part of the standard de-
loudness
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Connecting thread
**Commercially available (not included in the delivery scope)

Technical Data

Pneumatic jigsaw
Article number
0 607 561 ...
Output power
No-load stroke rate
Stroke
Cutting capacity, max.
– in wood
– in plastic
– in aluminium
– in steel (unalloyed)
Bevel cuts (left/right), max.
Max. working pressure for
tool
Thread size of hose
connection
Inner diameter of hose
Air consumption at no-load
Weight according to
EPTA-Procedure 01/2003
English | 17
... 116 ... 118
W 400 400
-1
min 2400 2200
mm 26 26
mm 85 85
mm 30 30
mm 15 15
mm 10 10
45° 45°
bar 6.3 6.3
psi 91 91
1/4" NPT 1/4" NPT
mm 10 10
l/s 17.5 17.5
cfm 37.1 37.1
kg 1.9 1.9
lbs 4.2 4.2
3 609 929 C73 | (9.12.13)