Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GST 18V-125 B Professional Originalbetriebsanleitung

16 | English
Ensure that the footplate always rests securely while
u
sawing. A jammed saw blade can break or lead to kick-
back.
When the cut is completed, switch off the power tool
u
and then pull the saw blade out of the cut only after it
has come to a standstill. In this manner you can avoid
kickback and can place down the power tool securely.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Use only undamaged saw blades that are in perfect
u
condition. Bent or dull saw blades can break, negatively
influence the cut, or lead to kickback.
Do not brake the saw blade to a stop by applying side
u
pressure after switching off. The saw blade can be dam-
aged, break or cause kickback.
Only use the power tool with the base plate. If you do
u
not use the base plate, you are at risk of not being able to
control the power tool.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
1 609 92A 7VS | (05.07.2022)

Intended Use

The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates, rubber and
laminate/HPL (High Pressure Laminate) while resting firmly
on the workpiece. It is suitable for straight and curved cuts
with mitre/bevel angles of up to 45°. The saw blade recom-
mendations are to be observed.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Safety guard
(2) Saw blade receptacle
(3) SDS lever for saw blade release
(4) Worklight
(5) Lock-off button for on/off switch
(6) On/off switch
(7) Stroke rate preselection thumbwheel
a)
(8) Rechargeable battery
a)
(9) Battery release button
(10) Handle (insulated gripping surface)
(11) Hex key
(12) Base plate
a)
(13) Glide shoe
(14) Sawdust blower device switch
(15) Orbital action adjusting lever
(16) Guide roller
a)
(17) Saw blade
(18) Anti-splinter guard
a)
(19) Hood for dust extraction
a)
(20) Extraction outlet
a)
(21) Extraction hose
(22) Base plate screw
(23) Scale for mitre/bevel angles
a)
(24) Guide for parallel guide
(25) Locking screw for parallel guide
(26) Parallel guide with circle cutter
a)
(27) Circle cutter centring tip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless jigsaw
Article number
Rated voltage
No-load stroke rate n₀
Stroke
Max. cutting depth
a)
a)
GST 18V‑125 B
3 601 EB3 0..
V= 18
−1
min 0–3500
mm 26
Bosch Power Tools