Stihl hse 81 Gebrauchsanleitung Seite 31

Workingh Techniques
Vertical cut
Swing the cutting blade from the bottom
upwards in an arc – lower the nose of the
blade, move along the hedge and then
swing the blade up again in an arc.
HSE 61, HSE 71, HSE 81
Horizontal cut
Hold the cutting blade at an angle of 0°
to 10° as you swing the hedge trimmer
horizontally, using both sides of the
blade.
Swing the cutting blade in an arc
towards the outside of the hedge so that
the cuttings are swept to the ground.
If the hedge is wide, cut it in several
passes – one hand on the front switch
lever – one hand on the control handle.
To extend your reach, hold the control
handle with one hand and operate the
auxiliary switch at the rear of the control
handle with the other hand.
English
29