Troubleshooting - Fagor LF 020 SX Installationsanleitung Und Bedienungsanl

DISHWASHER
If you find a problem when
using your dishwasher, you
will probably be able to sol-
ve it by consulting the fo-
llowing section.
1
TECHNICAL OR FUNCTIONAL PROBLEMS
When the dishwasher detects a fault, it shows a warning message on the display.
The fault is identified with
the letter "F" followed by a
number (from 1 to 10) at the
top of the display. At the
bottom, a text describing
the fault is displayed.
With the other faults, the
dishwasher stops working.
The F1 fault (close the door)
is the only fault that can be
solved immediately, by
closing the door. With the
other faults, the dishwasher
stops working.
Depending on the type of fault, contact your technical service and indicate the corresponding F (F1,
F2, etc.).
To
To identify the fault.
If this is not so, please con-
tact the TECHNICAL AS-
SISTANCE SERVICE and
be ready to provide as mu-
ch information as possible.
MALFUNCTION
Close the door
Not entering
Not leaking
Flood
Over heating
Not heating
Tem. no detect
No pressure
Not even
Seilure device
Action
The fault is identified with the letter "F"
followed by a number (from 1 to 10)
at the top of the display. At the bottom,
a text describing the fault is displayed.

TROUBLESHOOTING

F1
CLOSE THE DOOR
Can be solved by
F1
the user.
F2
F3
F4
F5
Must be solved by
the technical
F6
service.
F7
F8
F9
F10
Message on display
F1
CLOSE THE DOOR