Before Using For The First Time; How To Make An Espresso - BOMANN CB 176 Bedienungsanleitung, Garantie

4....-05-CB 176
• If difficulties are encountered when unscrewing the boiler lid, this may indicate
GB
that the machine is still pressurized. Let out the pressure with the procedure
described above.
Overview of the Single Components
1 Boiler lid
2 Boiler tank opening
3 Control selector
4 Boiler
5 Hot plate
6 Brewing head
7 Filter bowl
8 Filter holder
9 Filter catch
10 Filter handle
11 Filter spout
In order to remove all the dust that has deposited during the packing, wash the
glass pot, the filter shell, the filter holder and the drip collection tray with warm
soapy water. Do not use coarse or sharp cleansing agents. Wipe the base with a
clean and humid towel.
It is highly recommended to carry out a complete brewing cycle as described in
„Espresso Preparation" without any coffee powder before making your first cup of
espresso or cappuccino. By doing so, any residual dust left inside the espresso
machine will be removed.
The preparation of an espresso or cappuccino is different from that required for a
normal cup of coffee. Both espressos and cappuccinos are made by pressing boi-
ling water under pressure through finely ground coffee. Great attention is needed
and it is highly recommended to read carefully all the instructions and safety indica-
tions provided herein, before brewing.
TIP:
It is recommended to serve the espresso or cappuccino in pre-heated cups becau-
se the heat helps to retain the aroma!
1. Follow carefully the safety indications!
2. Place the control knob in OFF position.
3. Lay the drop grid on the round depression in the drop collector cover.
40
09.04.2002 15:22 Uhr

Before using for the first time

Follow carefully the Safety Instructions!

How to make an Espresso

Seite 40
12 Drop grid
13 Base
14 Brew
15 Release vapor
16 Display
17 Vapor tube
18 Vapor jet
19 Open – Handle position for the
insertion of the filter unit
20 LOCK – Handle position for the
use of the filter unit