Programmer Une Pyrolyse; Pyrolyse Avec Démarrage Immédiat Et Durée Présélectionnée; Programmation Durée Pyrolyse Avec Démarrage Immédiat; Programmation Durée Pyrolyse Avec Démarrage Différé - Scholtes FA 26.1 Bedienungsanleitung

Programming the Pyrolysis

Pyrolysis start indicator
Display
The duration of the "Pyrolysis" function is 120 minutes. This operating mode must be used when it is unnecessary
to programme the duration and starting time of the "Pyrolysis" function.
1 Turn the knob anticlockwise until the symbol "I" is displayed.
2 Ensure that the Pyrolysis start indicator is positioned under the hour hand. Otherwise, proceed as follows:
Press and turn the knob
Using the selector knob "B", select programme V. The oven may be switched off at any time by turning the knob
back to the "0" position.
The maximum duration of the "Pyrolysis" function is 120 minutes. If this function is set for more than 2 hours, it
will still turn off automatically after the maximum time period has elapsed.
1 Turn the knob anticlockwise until the Pyrolysis time is displayed.
2 Ensure that the Pyrolysis start indicator is positioned under the hour hand. Otherwise, proceed as follows:
Press and turn the knob
Select the program V using the knob "B".
The "Pyrolysis" function starts immediately and operates for the entire set time. A buzzer sounds when the time
has elapsed. To turn off the buzzer, turn the knob
The maximum duration of the "Pyrolysis" function is 120 minutes. If this function is set for more than 2 hours, it
will still turn off automatically after the maximum time period has elapsed.
1 "Pyrolysis" time:
Turn the knob anticlockwise until the Pyrolysis time is displayed.
2 "Pyrolysis" start:
Press and turn the knob
time.
Select the program V using the knob "B".
The "Pyrolysis" function will start on the set starting time and it will operate for the entire duration that has been
selected, but it will not exceed 2 hours. A buzzer sounds when the time has elapsed. To turn off the buzzer, turn
the knob anticlockwise until the symbol "O" is displayed.
clockwise or anticlockwise.
START
clockwise or anticlockwise.
START
clockwise or anticlockwise to position the Pyrolysis start indicator on the desired
START
- 33-
Pyrolysis start adjustment knob
START
Pyrolysis time adjustment knob (max
120 minutes)
anticlockwise until the symbol "O" is displayed.