switel BCC 50 Bedienungsanleitung Seite 47

VOX mode
setting
Scanning
Key lock
Ringing tone
Channel
monitoring
Press the Menu button (17) 3
times; the current VOX setting
(1,2,3, OF) flashes and the VOX
icon appears in the display.
Note: The VOX icon disappears when OF is
selected.
Press the Menu button (17) and
button (16) simultaneously to start
scanning. All the channels (1−8)
are scanned. Scanning stops
when a signal is detected and you
hear the active signal. Press the
PTT button (22) to switch to this
channel.
Press the Menu button (17) to end
the scanning function. Press but-
ton (16) to resume scanning.
Press button (21) for approx. 3
seconds to switch the key lock
function on or off.
Note: The key icon appears when the key lock
function is on and disappears when it is off.
Press the ringing tone button (14)
to alert other parties for 3 seconds
you wish to speak to them.
Note: The other parties hear the ringing tone
when they are on the same channel.
Press the Menu button (17) and
button (16) simultaneously to scan
the current channel for weak sig-
nals.
Press the Menu button (17) to end
the scanning function.
47