switel BCC 50 Bedienungsanleitung Seite 42

2. Connecting the power adapter plug to the
receiver unit
S
Connect the power adapter plug to the DC 7.5V socket (18) in
the receiver unit and to the power outlet.
3. Inserting the batteries in the
transmitter unit
S
Unlock the battery compartment (H) and remove the cover.
S
Ensure the correct polarity of the batteries.
S
Close the battery compartment.
4. Connecting the power adapter plug to the
transmitter unit
S
Connect the power adapter plug to the DC 10V socket (6) in the
transmitter unit and to the power outlet.
5. Wall installation of the transmitter unit
The transmitter unit can be mounted on a wall. You only need a screw
which fits in the slot on the rear of the transmitter unit.
42
The transmitter unit can be operated using 4 normal AAA"
batteries or rechargeable batteries of the same type.
Please remember that the batteries cannot be recharged
using the power adapter plug supplied. A commercially
available charging unit is required.