switel BCC 50 Bedienungsanleitung Seite 45

2. Receiver unit
Switch on
Switch off
Set the mem-
ory channel
Deactivate the
memory chan-
nel
Set the volume
3. Using the receiver unit as a walkie−talkie
You can use the receiver unit as a walkie−talkie in order to
communicate with other parties on the same channel. To
do this, exit from the memory channel mode (M1−M15) and
select one of the eight available channels.
VOX setting
The walkie−talkie is equipped with noise−activated electronics which
ensure that the unit only transmits when noises are actually detected.
It is not advisable to activate VOX mode when you are in a noisy
environment.
Press and hold the On/Off button
(17) until you hear the Beep sig-
nal.
Note: The display indicates the current chan-
nel or memory channel. The display goes out
when the unit is switched off.
Press the Menu button (17) twice;
use buttons (16,20) to select a
memory channel (M1−M15).
Note: M" appears in the display.
Press the Menu button (17) twice;
use buttons (16,20) to select OF".
Note: M" disappears from the display.
Use button (16) to increase the
volume; use button (20) to lower
it.
Note: The bar alters according to the volume
setting.
45