C) Mode 3 - VOLTCRAFT 1340001 Bedienungsanleitung

In mode 2, the battery must never be connected to the vehicle electronics during charging. Before
using this charging programme, the battery to be charged must first be disconnected from the
vehicle electronics. Otherwise, there is the risk of the vehicle electronics being damaged.
when using charging programme mode 2 for batteries with a liquid electrolyte, check the condi-
tion of the electrolyte since the high charging voltage in this programme can cause outgassing
and therefore loss of liquid.

c) Mode 3

Mode 3 is a normal charging programme for 12 v batteries.
Charge end voltage:
Charging current:
Suitable for:
Press the MODE button (2) repeatedly until the LED 12 v (5) is illuminated.
The LED 12 v (5) is illuminated during charging and CHARGING (11) is shown in the display (15).
Press the DISPLAY button (14) to show the charging voltage vOLTAGE (13) or the charging current CURRENT (12).
When the display (15) shows CHARGING (11) 100 (%) as charging status, the charging process is complete and
the charger switches to conservation charging.
Mode 3 together with the snowflake symbol (16) is a charging programme for 12 v batteries in a cold environment or
a charging programme especially for 12 v AGM batteries.
Charge end voltage:
Charging current:
Suitable for:
The thermal sensor at the device detects cold ambient temperatures and selects this charging mode automatically.
For charging of AGM batteries in normal ambient temperatures, press the MODE button (2) repeatedly until the LED
12 v (5) is illuminated together with the snowflake symbol (16).
The displays at the charger are the same as in the normal charging programme for mode 3. However, the snowflake
symbol (16) is illuminated additionally.
14.4 v
max. 25 A
lead-acid/lead-gel/maintenance-free lead batteries with 50 - 500 Ah
14.7 v
max. 25 A
lead-acid/lead-gel/maintenance-free lead batteries/AGM batteries with 50 - 500 Ah
27