Herunterladen Inhalt Inhalt Diese Seite drucken

Transport - Kärcher BR 40/25 C Bp Handbuch

Vorschau ausblenden Andere Handbücher für BR 40/25 C Bp:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Cleaning
 Turn the running gear to the back with
your foot.
 Turn the program selection switch to
the desired cleaning program.
 Set the water quantity according to the
degree of dirt accumulation and the
floor covering.
 Lower the vacuum bar.
 Turn on the brushes by pulling the con-
trol handle.
Caution
Risk of damage to the floor covering. Do
not operate the appliance on the spot.
Shutting Down the Appliance
 Close the water quantity regulator.
 Drive the appliance forward for another
1-2 m to draw off residual water.
 Turn the program selection switch to
"OFF".
 Raise the vacuum bar.
 Turn the running gear to the front with
your foot.
Caution
Danger of deformation of the brush(es).
When shutting down the appliance relieve
the brush(es) by turning forward the run-
ning gear.
Emptying the Dirt Water Reservoir
Note
If the dirt water reservoir is full the float
closes the suction channel. The suction op-
eration is interrupted. Empty the dirt water
reservoir.
Warning
Please observe the local provisions regard-
ing the wastewater treatment.
 Take the dirt water discharge hose from
the support and lower above a suited
collection device.
 Let off water by opening the dosage de-
vice at the discharge hose.
 The rinse the dirt water reservoir with
clear water.
Emptying the fresh water tank
 Release the coupling at the upper end
of the fill level display.
 Lower the hose for the fill level display into a
suitable collector and drain off liquid.
 Engage the coupling on the appliance
again.
 Unscrew the fresh water drain screw
and drain the liquid.
 Screw in the fresh water drain screw
and tighten it.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
 If you want to transport the machine on
a vehicle secure it from slipping using
belts/ ropes.
To reduce the required space the pushing
handle can be turned to the front:
 Release the star grips of the pushing
handle fastening.
 Push the pushing handle to the front.
– 9
EN
ECO model:

Transport

25

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bd 40/25 c eco bpBd 40/25 c eco bp packBd 40/25 c bp packBd 40/25 c bp

Inhaltsverzeichnis