Clock Setting; Timer Setting; Other Features - Grundig M 19-C Bedienungsanleitung

Allgemeiner Teil / General Section

CLOCK SETTING

Setting the clock
The clock will display in 24-hour mode, e.g.
00:00 or 23:59.
1 Press ON/OFF to switch on the set.
2 Press and hold CLOCK on the remote control
for 3 seconds.
– '24 HOUR' appears and the '24' starts
flashing.
3 Press CLOCK briefly.
4 Set the hour with A or B.
5 Press PROGRAM or CLOCK to store the hour
setting.
6 Set the minutes with A or B.
7 Press PROGRAM or CLOCK again to store
the setting.
– The clock starts running.
Notes:
1 The clock time is displayed during standby
mode.
2 If you wish to call up the clock time when the
unit is operating, press briefly the CLOCK
button on the remote control.
3 When a power interruption occurs, the clock
setting is erased.

TIMER SETTING

3a If you select REC TU...
A blank tape has to be inserted into the
cassette compartment.
• Press TIMER to confirm the REC TU selection.
Press PRESETA or B to select the preset
•
station to be recorded.
• Then, continue with steps 4 to 9.
4 Press TIMER to confirm your source selection.
– 'START' is displayed.
– The display shows '0:00' and '00' flashes.
5 Press A or B to set the hour for the timer to
start.
6 Press TIMER to store the hour setting.
7 Press A or B to set the minutes for the timer
to start.
8 Press TIMER to store the start time.
9 If you have selected REC TU, you should also
adjust the stop time. 'OFF' is displayed.
• Adjust the stop time in the same way as the
start time and press TIMER to store the stop
time.
– The TIMER is now set and the
remains lit.
To stop the timer
• Press TIMER on the remote control.
– The flag disappears from the display.
TIMER
To start the timer again
• Press TIMER on the remote control.
– The flag appears again on the display.
TIMER
Notes: When no button is pressed for 10
seconds, the set will automatically leave the timer
setting mode.
1 - 14
TIMER
105 340 1K 3K 10K Hz
TIMER
105 340 1K 3K 10K
105 105 340 340 1K 1K 3K 3K 10K 10K
TIMER
105 340 1K 3K 10K Hz
TIMER
105 340 1K 3K 10K Hz
TIMER
105 340 1K 3K 10K Hz
TIMER
flag
TIMER
105 340 1K 3K 10K Hz
SLEEP
105 105 340 340 1K 1K 3K 3K 10K 10K Hz Hz
SLEEP
105 340 1K 3K 10K
Setting the Timer
• The system can switch on to TUNER, CD,
TAPE or REC TU mode automatically at a
preset time.
It can serve as an alarm to wake you up.
One hour after the preset time, the system will
return to the standby mode if no button is
pressed.
2 4 0 0 • Before setting the timer, make sure the clock
is set correctly.
• The timer setting will remain active until you
reset it.
• The volume of the timer will be at the last
setting before the set is switched to standby
mode.
Timer Setting
1 Press ON/OFF to switch on the set.
2 Press and hold TIMER on the remote control
for 3 seconds.
– The
3 Press A or B to select the desired source.
– TUNER, CD, TAPE or REC TU.
3a If you select TUNER...
Press TIMER to confirm the tuner selection.
First, select the desired waveband (FM,
T U N E R
MW or LW) and then press PRESET A or
B to select the preset station.
• Then, continue with steps 4 to 8.
TUNED
PRESET STEREO
0 8 7 5 0 M
3a If you select CD...
Hz Hz
Track 1 will be selected and playback starts
automatically at the preset time.
• Continue with steps 4 to 8.
3a If you select TAPE...
Tape playback of the last selected deck will
start automatically at the preset time.
• Continue with steps 4 to 8.

OTHER FEATURES

Mute
This feature allows you to temporarily switch off
the sound of the system without switching off the
set when you require a moment of silence.
4 5 6 7 8
9 10 11 • Press MUTE on the remote control to switch
2
3
1
off the sound.
M U T E
– 'MUTE' is displayed.
Hz Hz
• Press MUTE on the remote control again or
adjust the volume on the set or on the remote
control to switch on the sound.
O N 0 0 0 0
Sleep
O N 0 0 0 0
This feature allows you to select a time after
which the system will switch to the standby mode
automatically.
• Press ON/OFF to switch on the set.
O F F 0 0 0 0
• Press SLEEP on the remote control repeatedly
to cycle through the sleep timer mode.
– 'SLEEP' and the
– The selection is as follows:
O F F 0 0 0 0
120 MIN –> 90 MIN –> 60 MIN –> 45
MIN –> 30 MIN –> 15 MIN –> 5 MIN –>
OFF –> 120 MIN ...
• Select the sleep time you desire.
S L E E P
When the sleep timer is switched on, you can
check the remaining time before the set switches
to standby mode.
1 2 0 M I N
• Press SLEEP once.
Hz
– The remaining time will scroll through the
display.
To switch off the sleep timer mode.
• Press SLEEP repeatedly until "OFF" is
displayed.
M 19-C / M 29-C
TIMER SETTING
flag flashes.
TIMER
flag are displayed.
SLEEP
GRUNDIG Service