Play Control; Programme Setting - Grundig MS 300 Benutzeranweisungen

DISC/USB/SD OPERATION ______________________
DISC Operation
1 While in ON mode,Press the
the unit or MODE button on the remote control to
select DISC mode.
2 Press the button on the unit or on the remote
control and the disc tray will open automatically.
3 Place the disc with the label side up into the
disc compartment, and then press the button on
the unit or on the remote control to close the disc
tray.
4 Play starts automatically. If play does not start
automatically, select a title/chapter/track and then
press button.
USB/SD CARD Operation
1 Insert the USB device or SD CARD device.
2 Press the
button on the unit or MODE
button on the remote control to select USB or SD
mode.
3 Play starts automatically. If play does not start
automatically, select a title/chapter/track and then
press button.

Play Control

Stop play.
Start, pause or resume play.
/ Previous track / Next track.
/ Perform fast forward/ reverse playback
Select shuffle play modes.
Repeat one:
Repeat all:
Repeat folder:
View extra information of playing content or
INFO
mode.
INTRO
Every soundtrack will be played for 10 Sec.
Folder
Play all tracks in next/last folder
Down/Up
40 ENGLISH
button on
flashing

Programme Setting

The user can programme up to 20 tracks in CD/
USB mode in any desired order. Programme
mode is activated while in STOP mode .
1 Press the
button on the remote control.
Press the PROG button to enter MEMORY mode.
2 Press the number (0-9) buttons or
buttons on the remote control to select the track
that you want to preset, then press PROG button
to confirm.
3 Repeat step 2 to programme more tracks.
4 Press the button to playback programme
tracks.
Note:
• If you want to change the programed files,
press the button two times to clear the
current program files, display shows
"PRG CLR", then repeat the program steps as
above to re-enter the new program files.
• Or opening the CD door to clear the current
program files.
/