Grundig M 19-C Bedienungsanleitung Seite 13

M 19-C / M 29-C
Selecting a desired track
Selecting a desired track at the stop mode
1 Press S or T on the unit or on the
remote control until the desired track
appears on the display.
2 Press B on the unit or on the remote
control to start playback.
– The selected track number and elapsed
playing time appear on the display.
Selecting a desired track during play
mode
1 Press S or T on the unit or on the
remote control until the desired track
appears on the display.
– The selected track number and elapsed
playing time appear on the display.
• If you press S once it will skip to the
beginning of the current track and play
the track again.
Searching for a particular
passage during playback
• Press and hold S or T on the unit
or on the remote control until the desired
passage is located. During the search,
the sound is played at a faster than
normal rate and at a reduced volume.
Playback returns to normal when S or
T is released.
Programming Tracks
Programming tracks of a loaded CD is possible
when CD playback is stopped. The display will
indicate the total tracks stored in the program. Up
to 30 tracks can be stored in the memory in any
order. When 30 tracks are stored and you attempt
to store another track, the display will show
"PROGRAM FULL".
1 Load the desired discs in the disc trays.
2 Press PROGRAM on the unit or on the remote
control to start programming.
– The . flag lights up on the display.
PROG
3 Press the desired disc button to select the
disc.
4 Press S or T to select the desired track.
5 Press PROGRAM to store the track.
• Repeat steps 2 to 5 to store other discs and
tracks.
Note:
The track number indicator always shows which
numbers have been stored in the programme.
Playing the program
1 Press B on the unit or on the remote control
to start program playback.
– "PROGRAM PLAY" scrolls across the display.
– The track number and elapsed playing time
of the current track will appear on the
display.
2 Press 9 (or STOP/CLEAR on the remote
control) to stop program playback.
GRUNDIG Service
CD CHANGER
RANDOM 1 2 3 4 5 6
9 10 11
2
3
1
105 340 1K 3K 10K Hz
RANDOM 1 2 3 4
9 10 11
2
1 3
3 0 0 2
105 340 1K 3K 10K Hz
3 4 5 6 7 8
9 10 11 12 13 14 15 >15
2
1 3
3 4 1 0
105 340 1K 3K 10K Hz
RPT. 1
3
2
1 3
3 4 1 0
105 340 1K 3K 10K Hz
RPT. 1 ALL 1 2 3 4 5 6
9 10 11 12 13 14
2
1 3
2 3 0 2
105 340 1K 3K 10K Hz
RPT. ALL
2 3 4
9 10 11 12
2
3
1
2 3 0 2
105 340 1K 3K 10K Hz
CD CHANGER
PROG. 2
2
1 3
2 P - 0 1
105 340 1K 3K 10K Hz
PROG.
2
2
3
1
2 4 1 0
105 340 1K 3K 10K Hz
PROG. 2
2
1 3
5 P - 0 2
105 340 1K 3K 10K Hz
PROG.
2
1 3
5
105 340 1K 3K 10K Hz
9
2
DECK B
3
1
RECORD
3
∂
105 340 1K 3K 10K Hz
Random function
7 8
RANDOM – playing all the tracks in random order
disc by disc.
1 Press RANDOM on the remote control).
5 6 7 8
– A moving symbol appears on the display.
– The flag, the disc and the track selected
RANDOM
at random appear on the display.
• The tracks will now be played in random order
disc by disc until you press 9.
2 Press RANDOM again to resume normal play.
– The flag disappears from the display.
RANDOM
Intro function
INTRO – playing the first ten seconds of each track
on all discs in the CD tray.
1 Press INTRO on the remote control to play the first
ten seconds of each track on all discs in the CD
tray.
– 'INTRO SCAN ON' scrolls across the display.
• Press INTRO again while a desired track is
playing to resume normal playback.
– 'INTRO SCAN OFF' scrolls across the display.
Repeat function
REPEAT – to playback one track, one disc, all three
discs or a programme repeatedly.
• Press REPEAT on the remote control.
– You can change the repeat status from RPT 1 to
RPT 1 ALL to RPT ALL to repeat off.
– RPT 1: A specific title is played over and over
again.
7 8
15 >15
– RPT 1 ALL: The current CD is repeated from the
beginning till the end of the CD´s last title.
– RPT ALL: All CD's are repeated from the
5 6 7 8
beginning till the end.
13 14 15 >15
When REPEAT is pressed in the programme
mode, the programmed track(s) on one disc will
be repeated.
Erasing the program (in the stop
position)
1 Press 9 on the unit or STOP/CLEAR on the
remote control.
– The last stored track is erased.
– 'CLEARED' appears on the display.
2 Press and hold 9 on the unit or STOP/CLEAR
on the remote control for 2 seconds.
– All the programmed tracks are erased.
– 'PROGRAM CLEAR' appears on the display.
Note : The program is also erased when the set
is disconnected from the power supply or the CD
tray is opened.
CD Synchro Start Recording
1 Load a blank cassette (full spool to the left)
5
into TAPE DECK B.
2 Press CD to select CD.
3 Load a disc into the disc tray.
2 5
4 Press AUTO REV. to select the play mode ( å
8 0 8
or ∂ ) for TAPE DECK B.
5 Press and hold RECORD on the unit or on the
remote control for 1 second.
– 'CD SYNCHRO' scrolls across the display.
3 4 5 6 7 8
10 11 – The flag appears on the display.
RECORD
– The CD starts playing after a seven-second
4 0 0
delay to prevent recording on the leader tape
at the beginning of the tape.
6 You can program the tracks in the order you
want them to be recorded (see Programming
Tracks).
– 'PROGRAM REC' appears then on the display.
7 Press 9 to stop recording.
Allgemeiner Teil / General Section
1 - 13