Usage; Mounting The Grinding Wheel - Lukas AM 07/100 GH Bedienungsanleitung

Suitable oil types
Festo Spezialöl
Aral Vitam GF 22
Esso Nuto H 22
Mobil DTE 22
BP Energol HLP 22
Shell Tellus C 22

4. Usage

Only conical grinding wheels type 4 according to DIN ISO 603-12 with a maximum di-
ameter of 125 mm and a minimum permissible operating speed of 50 m/s are allo-
wed for usage. The use of cutting discs as well as groove and profile milling cutters is
prohibited.
Only use tools with a permissible operating speed of at least the maximum speed of
the power tool.
Always ensure that the main load is transmitted in a radial direction (i.e. on the tool
circumference) and not in an axial direction to the power tool.
Before changing a tool or undoing the compressed air hose, the power tool must be
disconnected from the compressed air supply.

5. Mounting the grinding wheel

Before mounting a grinding wheel the power tool must be disconnected from the
compressed air supply.
The grinding wheel must be checked for damages. Do not use damaged wheels.
Stand: 27.10.2008
Viscosity
22 mm²/s(=cSt) bei 40°C
ISO-Klasse VG 22
nach ISO 3448
14 - AM 07/100 GH -