BADU Jet Smart KH Montage- Und Bedienungsanleitung Seite 48

Annex I
1
Replacement of the pneumatic push button
1
3
5
48
Loosen the cable socket (1)
Loosen and unscrew the
pneumatic push button (2)
counter clockwise, by means of
a water pump pliers or a socket
spanner SW 34, a fork wrench
SW 34 or an adjusting spanner.
Pill out the pneumatic push
button (2) carefully together
with the hose over the water
level.
Carefully pull back the hose
at the cable socket (1)
Screw in the pneumatic
push button (2), only tighten
by hand. Do not use force!
2
Tighten the cable socket (1)
07.05.2008 TB-b bta badu jet smart_engl.indd
2
4
6
1
2