Cleaning The Oven Door; Removing The Oven Door From Its Hinges - hanseatic 65EAE40153 Gebrauchsanleitung

Page GB-22 Cleaning the built-in oven
Inserting the baking tray guides
1. First insert the baking tray guide (9) using
the curved brackets (24) into the holes in
the wall and fold it down against the wall.
2. Then attach the baking tray guides using
the screw (23).
Now you can use the baking tray guides
(9) again as usual and insert the baking
tray (3), the oven rack (4) and the dripping
pan (5).

Cleaning the oven door

NOTICE
Risk of breakage and injury!
Dropping the oven door poses a risk of
breakage and injury, because it com-
prises two panes of heavy glass. You
can cut yourself on the shards.
Do not let the oven door or individual
■
glass panels fall.
Do not hit the oven door and the indi-
■
vidual panels of glass anywhere.
Do not use the built-in oven when the
■
glass is damaged because the built-
in oven is no longer safe. Instead, in-
form our customer service team (see
„Our Service Centre" on page GB-28).
If a glass pane breaks, keep children
■
away from it and carefully collect all
the pieces of glass.
Removing the oven door from
its hinges
The oven door (7) can be removed from its
hinges as follows to enable easy cleaning of
all areas of the built-in oven:
1. Open the oven door completely.
2. Fold the clips (25) on both sides all the
way forward. Use a screwdriver if neces-
sary.
(25) ) 5) 5)
3. Only close the oven door so far that there
is still a gap of approx. 10 cm.
4. Lightly lift and guide the oven door for-
ward out of its hinges.