Product Specifications; Product Elements - Bosch GCM 10 S PROFESSIONAL Bedienungsanleitung

Product Specifications

Slide Miter Saw
Order number
0 601 B20 ...
Rated input
power
Voltage
Frequency
No load speed [min
Tool spindle [mm]
Weight without
mains cable
Saw blade ∅
[Inch]
Protection class
For maximum work piece dimensions,
see the "Working Instructions" Section

Product Elements

The numbering of the machine elements refers to the
illustrations of the electro tool on the front pages of the
operating instructions.
1 Dust bag
2 Knurled nut of the depth stop
3 Protective hood
* * * *
4 Locking lever
5 On/Off switch
6 Handle
7 Saw blade
8 Swinging guard
9 Fence
10 Scale for mitre angle (horizontal)
11 Table insert
12 Locking clamp
13 Locking knob for variable mitre angles (horizontal)
14 Lever for mitre angle adjustment (horizontal)
* * * *
Not included for 0 601 B20 537 (Australia):
The swinging guard 8 cannot be locked. Perform the
operations described in the following accordingly with
out the locking lever 4.
1 609 929 E49 • (03.09) PS
GCM 10 S
PROFESSIONAL
... 503 ... 537 ... 541
... 508
... 532
... 542
[W] 1 800 1 800
[V] 230 240
[Hz] 50 50
1
] 4 600 4 700
30 25.4
[kg] 21.5 21.5
10 10
/ II / II
15 Angle indicator (horizontal)
16 Detents for standard mitre angles
17 Saw table
18 Mounting holes
19 Socket head screws (6 mm) of the saw table ex
tension
20 Holes for extension hoop
21 Saw table extension
1 500
22 Screw clamp
23 Stop bolt for 45° bevel angle (vertical)
110
24 Stop bolt for 0° bevel angle (vertical)
50
25 Slide rails
4 300
26 Locking screw for the slide rails
27 Phillips screw (attachment of the swinging guard)
30
28 Phillips screw (attachment of the swinging guard)
21.5
29 Vacuuming adapter
10
30 Socket head screws (6 mm) of the fence
31 Drillings for the screw clamp
/ II
32 Allen key (5 mm)
33 Setting knob for 33.9° bevel angle (vertical)
34 Clamping handle for variable bevel angle (vertical)
35 Transport locking pin
36 Adjustment screw for the depth stop
37 Ring/open ended spanner (ring: 13 mm; open
ended: 12 mm)
38 Spindle lock
39 Hex head bolt for attaching the saw blade
40 Washer
41 Clamping flange
42 Tool spindle
43 Sawdust ejector
46 Screw of the angle indicator (horizontal)
45 Angle indicator (vertical)
46 Screw of the angle indicator (vertical)
47 Locking nut for the depth stop (12 mm)
48 Depth stop
49 Screws of the table insert
50 Scale for the bevel angle (vertical)
Not all the accessories illustrated or described are in
cluded in standard delivery.
English–5