Warranty - Storch ProCut minerals PLUS Bedienungsanleitung

Window cut-out (L- cut)
Measure the distances (a and b, Fig. i) between the glued insulating boards and the window frame or jamb and transfer
these measurements to the insulating board being cut. Position this board on the right-hand bearing rail (3) and align the
marking for the cut (a) precisely with the rear cutting guide (12).
Execute the cut as described above under "Longitudinal and lateral cut", but only as far as the marking (b).
Turn the board 90° to the left and align the marking for the cut (b) precisely with the rear cutting guide. Turn the board of
the right-hand window side 90° to the right.
Fig. i
Fig. k
Window

Warranty

Warranty conditions:
A warranty period of twelve months from the date of purchase/date of invoice applies to our tools for commercial
customers. If we have granted an extended warranty period, this period will be noted separately in the operating manu-
al for the equipment in question.
Claims:
If you wish to claim under our warranty or guarantee, please return the complete device and your invoice to our logisti-
cs centre in Berka, postage paid, or send it to one of our authorised service centres.
Please contact the chargeable STORCH service hotline first: +49 (0)202 . 49 20 – 110.
Your rights under our warranty or guarantee:
Claims can only be accepted for material defects or manufacturing errors, and only assuming intended use of the appli-
ance. Wear parts are not covered by such claims. All claims shall become void in the event of installation of third party
components, improper handling and storage, as well as in the event of obvious disregard of the operating instructions.
Repairs:
All repairs have to be conducted on our premises or by an authorised STORCH service centre.
Window
glued insulating
boards
51
Translation of the original instruction