Electric Shock Hazard; Personal Protective Equipment - Storch LP 540 flex Handbuch

ELECTRIC SHOCK HAZARD

Improper earthing, setup, or usage of the system can cause electric shock.
• Turn off and disconnect the power cable before servicing the equipment.
• Only use earthed electrical outlets.
• Use only 3-wire extension cords.
• Make sure earthing contacts are intact on the sprayer and extension cables.
• Do not expose to rain. Store indoors
PRESSURISED ALUMINIUM PARTS HAZARD
Use of fluids that are incompatible with aluminium in pressurised equipment can cause serious chemical reaction and
equipment defects. Failure to observe this warning can result in death, severe injury or damage to property.
• Do not use trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or materials containing
such solvents.
• Many other fluids may contain chemicals that can react with aluminium. Contact your material supplier for compa-
tibility.
MOVING PARTS HAZARD
• Moving parts can pinch, cut or amputate fingers and other body parts.
• Do not operate equipment with protective guards or covers removed.
• Pressurised equipment can start without warning. Before checking, moving, or servicing equipment, follow the
Pressure Relief Procedure and disconnect all power sources.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equip-
ment to help protect you from serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns.
This equipment includes but is not limited to:
• Protective eyewear, and hearing protection.
• Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.
133