Specifications; Standard Accessories - Hitachi DS 14DSAL Bedienungsanleitung

Make sure that any swarf and dust falling on the
power tool during work do not collect on the battery.
Do not store an unused battery in a location exposed
to swarf and dust.
Before storing a battery, remove any swarf and dust
that may adhere to it and do not store it together
with metal parts (screws, nails, etc.).
2. Do not pierce battery with a sharp object such as a
nail, strike with a hammer, step on, throw or subject
the battery to severe physical shock.
3. Do not use an apparently damaged or deformed battery.
4. Do not use the battery in reverse polarity.
5. Do not connect directly to an electrical outlets or car
cigarette lighter sockets.
6. Do not use the battery for a purpose other than those specified.
7. If the battery charging fails to complete even when a
specified recharging time has elapsed, immediately
stop further recharging.
8. Do not put or subject the battery to high temperatures
or high pressure such as into a microwave oven,
dryer, or high pressure container.
9. Keep away from fire immediately when leakage or
foul odor are detected.
10. Do not use in a location where strong static electricity generates.

SPECIFICATIONS

POWER TOOL
Model
No-load speed (Low/High)
Wood
(Thickness 18 mm)
Drilling
Metal
(Thickness 1.6 mm)
Capacity
Machine screw
Driving
Wood screw
Rechargeable battery
Weight
CHARGER
Model UC18YRSL
Charging voltage 14.4 V – 18 V
Weight
0 – 300 / 0 – 1500 min
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
BSL1430: Li-ion 14.4 V BSL1415X: Li-ion 14.4 V BSL1830: Li-ion 18 V BSL1815X: Li-ion 18 V
(3.0 Ah 8 cells)
1.7 kg
UC18YGSL
14.4 V – 18 V
0.6 kg 0.4 kg
11. If there is battery leakage, foul odor, heat generated,
discolored or deformed, or in any way appears
abnormal during use, recharging or storage,
immediately remove it from the equipment or
battery charger, and stop use.
CAUTION
1. If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and contact
a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.
WARNING
If a conductive foreign matter enters in the terminal of
lithium ion battery, the battery may be shorted, causing
fire. . When storing the lithium ion battery, obey surely
the rules of following contents.
Do not place conductive debris, nail and wires such
as iron wire and copper wire in the storage case.
To prevent shorting from occurring, load the battery
in the tool or insert securely the battery cover for
storing until the ventilator is not seen (See Fig. 1).
DS14DSAL
–1
38 mm
Steel: 13 mm,
Aluminum: 13 mm
6 mm
(1.5 Ah 4 cells)
1.4 kg

STANDARD ACCESSORIES

1 Plus driver bit (No.2) .................... 1
2 Charger (UC18YGSL or UC18YRSL) ... 1
DS18DSAL
3 Battery (BSL1830 or BSL1815X) .... 2
4 Plastic case ....................................... 1
5 Battery cover .................................... 1
1 Plus driver bit (No.2) .................... 1
2 Charger (UC18YGSL or UC18YRSL) ... 1
3 Battery (BSL1430 or BSL1415X) .... 2
DS14DSAL
4 Plastic case ....................................... 1
5 Battery cover .................................... 1
Standard accessories are subject to change without
notice.
English
DS18DSAL
0 – 350 / 0 – 1500 min
45 mm
8 mm (diameter) × 100 mm (length)
Requires a pilot hole)
(3.0 Ah 10 cells) (1.5 Ah 5 cells)
1.8 kg 1.5 kg
–1
10