Menu List - Tascam DR-100MK 3 Bedienungsanleitung

Category Desired action/explanation
Change date and time
Set the language
System
Restore factory default settings
Format an SD card
Prevent accidental operation
Disable input level operations.
Operation Disable the input level knob and all buttons.
Operate the the unit remotely
Set the remote control used.
Turn the power off automatically (Automatic
power saving function)
Prevent batteries from being drained when
the unit is left unused.
The unit will not turn off automatically during
recording or playback.
Use the unit for extended amounts of time
Settings
Continuous operation for an extended amount
of time is possible by using both the built-in
Power
battery and AA batteries. Set whether to use
the built-in battery or the AA batteries first.
Set the type of AA batteries used to allow the
unit to show the remaining charge accurately.
Starting recording immediately
When the unit is off (in standby mode), press
the (power) button while pressing and
holding the REC button to turn it on and start
recording immediately.
Prepare for synchronization with a video file
The unit can automatically generate a tone
signal when beginning and ending recordings.
By having the unit record this tone signal and
Other
the camera record its output sound, synchro-
functions
nizing during video editing can be made
easier.
Input signals to a camera
The line output level can be attenuated 30 dB.

Menu list

Procedures, buttons used
MENU w SYSTEM w DATE/TIME
Press the MENU button to open the MENU Screen.
MENU w SYSTEM w LANGUAGE
MENU w SYSTEM w INITIALIZE
Menu item
MENU w SYSTEM w
BROWSE
MEDIA FORMAT
HOLD w LEVEL
HOLD w ALL
REC SETTING
MENU w SYSTEM w REMOTE
MENU w POWER/DISPLAY w
AUTO PWR SAVE
MENU w POWER/DISPLAY w
BATTERY w PRIORITY
I/O SETTING
MENU w POWER/DISPLAY w
BATTERY w AA TYPE
Press (power) while pressing and
holding REC
MARK SETTING
MENU w REC SETTING w
AUTO TONE
POWER/DISPLAY
MENU w I/O SETTING w
OUTPUT ATT w LINE
Function
Work with files and folders on the SD card
Set the recording file format
FORMAT
Set the sampling frequency
SAMPLE
Set the file type
FILE TYPE
XRI Turn XRI data recording on/off
Set dual recording function
DUAL REC
Set the recording time interval for automatically incrementing files
FILE INC
Set the auto-recording function
AUTO REC
Set the pre-recording function
PRE REC
AUTO TONE Set the auto tone function
Set the input source
SOURCE
Set the A/D converter filter
A/D FILTER
Turn on/off this function that improves S/N performance
DUAL ADC
Set the phantom power voltage
PHANTOM VOLT
Turn plug-in power on/off
PLUG IN POWER
Set the low-cut filter
LOW CUT
Set the level control function
LEVEL CONTROL
Set the mid-side decoding function
MS DECODE
OUTPUT ATT Set the output attenuator function
Set the automatic mark function
AUTO MARK
Turn the peak mark function on/off
PEAK MARK
Set the mark skip mode
MARK SKIP
Set the automatic power saving function
AUTO PWR SAVE
BATTERY Makes settings related to the built-in and replaceable batteries
Set how long the backlight stays on
BACKLIGHT
Set the backlight brightness
BRIGHTNESS
Adjust the contrast
CONTRAST
Turn indicators on/off
INDICATORS
Set the level meter peak hold function
PEAK LEVEL
13
TASCAM DR-100MKIII