Audio Performance; Recording Times (In Hours: Minutes); Other - Tascam DR-100MK 3 Bedienungsanleitung

Audio performance

8 Frequency response
MIC/LINE IN (MIC, PAD On) to LINE OUT
MIC/LINE IN (LINE) to LINE OUT
EXT IN (MIC, PAD On) to LINE OUT
EXT IN (LINE) to LINE OUT
20Hz−20kHz +0.5dB/−1dB (44.1/48kHz sampling frequency, JEITA)
20Hz−40kHz +0.5dB/−2dB (88.2/96kHz sampling frequency, JEITA)
20Hz−80kHz +0.5/−4dB (176.4kHz/192kHz sampling frequency, JEITA)
8 Distortion
MIC/LINE IN (MIC, PAD On) to LINE OUT
MIC/LINE IN (LINE, +20dBu Input) to LINE OUT
EXT IN (MIC, PAD On) to LINE OUT
EXT IN (LINE) to LINE OUT
0.007% or less
(44.1/48/88.2/96/176.4/192kHz sampling frequency, JEITA)
8 S/N ratio
MIC/LINE IN (MIC, PAD On) to LINE OUT
MIC/LINE IN (LINE) to LINE OUT
EXT IN (MIC, PAD On) to LINE OUT
EXT IN (LINE) to LINE OUT
102 dB or more
(44.1/48/88.2/96/176.4/192kHz sampling frequency, JEITA)
8 Equivalent input noise (EIN)
124 dBu or lower
Note: based on JEITA CP-2150

Recording times (in hours: minutes)

File format (recording setting)
320kbps MP3 (stereo)
44.1kHz
16-bit WAV (stereo)
24-bit WAV (stereo) 96kHz
24-bit WAV (stereo) 192kHz
•
The recording times above are theoretical values and might differ
depending on the SD/SDHC/SDXC card in use.
•
The recording times shown above are not continuous recording times, but
rather they are the total possible recording times for the SD/SDHC/SDXC
card.
•
If recorded in mono, maximum recording times will be about double those
above.
•
If using dual recording, maximum recording times will be about half those
above.

Other

8 Power
Built-in lithium-ion rechargeable battery
2 AA batteries (alkaline, NiMH or lithium-ion)
USB bus power from a computer
AC adapter (TASCAM PS-P520E, sold separately)
External battery pack (TASCAM BP-6AA, sold separately)
8 Power consumption
7.5 W (maximum)
8 Battery operation time (continuous operation)
•
Using built-in (lithium-ion rechargeable) battery
Use conditions
UNI MIC (built-in directional mic) input
Phantom power unused
STEREO WAV (BWF)/44.1kHz
16-bit recording
MIC/LINE IN jack/mic input
Phantom power used (+48V, 3mA×2 load)
STEREO WAV (BWF)/44.1kHz
16-bit recording
•
Using alkaline batteries (EVOLTA)
Use conditions
UNI MIC (built-in directional mic) input
Phantom power unused
STEREO WAV (BWF)/44.1kHz
16-bit recording
MIC/LINE IN jack/mic input
4GB SDHC card
Phantom power used (+48V, 3mA×2 load)
STEREO WAV (BWF)/44.1kHz
27:46
16-bit recording
6:17
•
Using NiMH batteries (eneloop)
1:55
Use conditions
00:57
UNI MIC (built-in directional mic) input
Phantom power unused
STEREO WAV (BWF)/44.1kHz
16-bit recording
MIC/LINE IN jack/mic input
Phantom power used (+48V, 3mA×2 load)
STEREO WAV (BWF)/44.1kHz
16-bit recording
•
Using lithium-ion batteries (Energizer Ultimate Lithium)
Use conditions
UNI MIC (built-in directional mic) input
Phantom power unused
STEREO WAV (BWF)/44.1kHz
16-bit recording
MIC/LINE IN jack/mic input
Phantom power used (+48V, 3mA×2 load)
STEREO WAV (BWF)/44.1kHz
16-bit recording
NOTE
When using phantom power, the operation time might be reduced
depending on the mic being used.
Operation time
8 Charging time (when unit off)
About 12 hours •
By USB: about 10 hours
•
Using PS-P520E: about 4.5 hours
8 Dimensions
About 6 hours
80 x 155.7 x 35 mm (width × height × depth, excluding protrusions)
8 Weight
425 g/375 g (including batteries/not including batteries)
Operation time
8 Operating temperature range
0°C–40°C (32°F–104°F)
About 2.75 hours
•
Illustrations in this manual might differ in part from the actual product.
•
Specifications and external appearance might be changed without
notification to improve the product.
•
About 1 hours
Detailed specifications are provided in the Reference Manual.
Operation time
About 3.5 hours
About 2.25 hours
Operation time
About 7 hours
About 3.5 hours
17
TASCAM DR-100MKIII