Menu Structure; Recording Screen - Tascam DR-40 Bedienungsanleitung

Menu structure

MENU
Make recording settings
REC SETTING
Make playback settings
PLAY SETTING
BROWSE Work with files and
folders on the SD card
SPEAKER Turn the built-in
speaker on/off
OTHERS Open the OTHERS
submenu
INFORMATION View information
Use the tuner
TUNER
Make effect settings
EFFECT
Make file name settings
FILE NAME
Set the date and time
DATE/TIME
Footswitch and wired
REMOTE
remote control settings
Make system settings
SYSTEM
12
TASCAM DR-40
Recording

Recording Screen

Recording format
1
This shows the file recording format.
WAV 16, WAV 24, BWF 16, BWF 24, MP3 320k,
MP3 256k, MP3 192k, MP3 128k, MP3 96k,
MP3 64k, MP3 32k
Pre or Auto recording function status
2
appears when the prerecording function is
ON and the unit is in recording standby.
appears when the auto recording function
is ON and the unit is recording.
Recording sampling frequency
3
This shows the file recording sampling
frequency.
44.1k, 48k, 96k
4 Number of recording channels
This shows the number of recording channels
in the file.
ST, MONO
5 Elapsed recording time
The elapsed recording time of the file appears
as hours: minutes: seconds.
6 Built-in stereo microphone left-right
setting
If the left-right setting of the built-in stereo
microphone is not correct for the current mic
angle, the current left-right setting will be
shown.
Icon Mic angle
Closed (X-Y)
Open (A-B)
y
Recorder operation status
7
This icon shows the recorder operation status.
Indicator Meaning
Recording standby or recording
09
paused
Recording
0
Input source
8
This icon shows the input source.
Indicator
Meaning
examples
Built-in mic set as input source
EXT MIC/LINE IN jack set as input
source
Input source set to DUAL (-6 to
-12) in dual recording mode
Channels 1-2 are a playback file in
OVERDUB SEPARATE mode
Mix of playback file and built-in
mic set as input source in
OVERDUB MIX mode
Mix of playback file and EXT MIC/
LINE IN set as input source in
OVERDUB MIX mode
MIC setting
L-R
R-L