Quick Reference For Using Various Functions - Tascam DR-100MK 3 Bedienungsanleitung

Quick reference for using various functions

•
Button names are shown like this: MENU.
•
The following menu operations assume that the Home Screen is open before starting. Instructions are abbreviated.
For example, "Press the MENU button, select the menu item, and then select the setting item" becomes "MENU
w menu item w setting item".
•
For function details, see the Reference Manual.
Category Desired action/explanation
Select input sources
You can select the input source as you like and
according to the application.
Use a condenser mic that requires phantom
power supply
You can set the phantom power voltage.
Use a small condenser mic that requires plug-in
power supply
Input settings
The unit can supply plug-in power.
Use mid-side microphones
The unit can convert mid-side format stereo
mic signals into ordinary stereo signals.
Air-conditioning or other noise is bothersome
The low-cut filter can reduce noise from
air-conditioners and other sources.
Recording
Record in mono
Adjust the input level
If you want to adjust the left and right input
levels separately, set the INPUT LEVEL
selection switch to L or R.
Record without distortion
The meters are still peeking even though the
input level knob is turned all the way down.
Input level
Avoid distortion when signals that are too loud
are input suddenly. (Limiter function)
Automatically adjust the recording level in
response to the input sound. (Automatic level
mode)
Automatically reduce the input level in
response to the maximum level of the input
sound. (Peak reduction mode)
Category
Procedures, buttons used
MENU w I/O SETTING w SOURCE
Turn the PHANTOM switch ON
MENU w I/O SETTING w
PHANTOM VOLT
MENU w I/O SETTING w
PLUG IN POWER
Recording
MENU w I/O SETTING w
MS DECODE
MENU w I/O SETTING w
LOW CUT
MENU w REC SETTING w
FILE TYPE
Input level knob
INPUT LEVEL selection switch
Turn the MIC PAD switch ON
Turn the LIMITER switch ON
MENU w I/O SETTING w
LEVEL CONTROL w AUTO LEVEL
Playing recordings
MENU w I/O SETTING w
LEVEL CONTROL w PEAK REDUCTION
Desired action/explanation
Set the recording audio quality
You can set the recording audio quality as you
like and according to the application.
Record with even higher quality
Basic settings
Change the ADC audio quality.
Improve the S/N performance.
Change where recording files are saved
Create a new file while continuing to record (file incrementing function)
Manually increment files
Automatically increment files at set time
intervals
Divide the recorded file that is selected
Divide a file manually
(File division function)
Divide at all mark positions.
(Mark division function)
Start recording automatically (Automatic
recording function)
Other
The unit can start recording when it detects an
functions
input signal level.
Record without losing the first sound at the
being of a file (Pre-recording function)
The unit can record up to two seconds before
recording is triggered.
Record a backup
The unit can record a backup at a level 12dB
lower than the set recording level.
Simultaneously record WAV and MP3 files
The unit can simultaneously record WAV and
MP3 files.
Listen to playback through the built-in speaker
Adjust the headphone/speaker volume
They volume might differ depending on the
headphones used.
Set this according to the headphones you are
using.
Change the playback file
Select a file before or after
Select from a list
Procedures, buttons used
MENU w REC SETTING w FORMAT
MENU w REC SETTING w SAMPLE
MENU w I/O SETTING w
A/D FILTER
MENU w I/O SETTING w
DUAL ADC
MENU w BROWSE
/ while recording
MENU w REC SETTING w
FILE INC
Fn w DIVIDE w DIVIDE
Fn w DIVIDE w MARK DIVIDE
MENU w REC SETTING w
AUTO REC w MODE w LEVEL
MENU w REC SETTING w
PRE REC
MENU w REC SETTING w
DUAL REC w MODE w LEVEL
MENU w REC SETTING w
DUAL REC w MODE w FORMAT
Set the (speaker) switch to ON
(headphone/speaker) LEVEL
volume
MENU w I/O SETTING w
OUTPUT ATT w PHONES
.//
MENU w BROWSE
11
TASCAM DR-100MKIII