Tascam DR-100MK 3 Bedienungsanleitung Seite 12

Category Desired action/explanation
Change the playback position
Change the playback position while
outputting sound.
Move without outputting sound.
Repeat playback
Playing recordings
The unit can continuously repeat playback
of a single file or an interval. (Loop playback
function)
Change playback speed
The unit can play files slowly or quickly. (VSA
playback function)
Save a file
Save the selected file
Select a file and save it
Delete a file
Delete a selected file
Select a file and delete it
Delete all files at the same time
Files Create a folder
Delete a folder
Change the file name format
Reset the file number
Reset the file number immediately
Reset the file number each time a new folder
is created
Connect to a computer and transfer audio files
You can use this unit as USB mass storage.
Add marks manually
Marks
You can add marks manually when recording
or playing back (but not when stopped).
12
TASCAM DR-100MKIII
Procedures, buttons used
Press and hold .//
Wheel
Fn w LOOP PLAY
Fn w VSA PLAY
Fn w CHANGE PROTECT
MENU w BROWSE w Fn w
CHANGE PROTECT
Fn w FILE DELETE
MENU w BROWSE w Fn w
FILE DELETE
MENU w BROWSE w Fn w
ALL FILES DELETE
MENU w BROWSE w NEW FOLDER
MENU w BROWSE w Fn w
FOLDER DELETE
MENU w SYSTEM w FILE NAME
MENU w SYSTEM w
FILE No.RESET w RESET
MENU w SYSTEM w
FILE No.RESET w ON
MENU w SYSTEM w USB STORAGE
ENTER/MARK when recording or
playing back
Category Desired action/explanation
Add marks automatically to a recording
Add when the set level is exceeded (LEVEL).
Add when the set time is reached (TIME).
Add when a digital input track division is
detected (DIGITAL).
Add when a level indicator PEAK lights.
Move to a mark position
Marks
Move to a mark position.
Select the mark to move to.
Delete a mark
When stopped, move to a mark position and
press the ENTER/MARK button to delete it.
Delete all marks in a file at the same time.
Turn off the backlight
Change the display brightness
Adjust the contrast
Display
Turn off the level and REC indicators
Change the peak level and hold
Clear held peak levels
This works only when the peak hold function
mode is set to HOLD.
Settings
View various types of information
You can view information about the SD card.
You can check the firmware version.
System
You can view information about files.
You can view settings used while recording.
If the XRI data recording function is turned ON,
settings used during recording will be saved
with the file.
Procedures, buttons used
MENU w MARK SETTING w
AUTO MARK w MODE
MENU w MARK SETTING w
PEAK MARK
ENTER/MARK + .//
MENU w MARK SETTING w
MARK SKIP
ENTER/MARK
MENU w BROWSE w Fn w
CLR ALL MARKS
MENU w POWER/DISPLAY w
BACKLIGHT
MENU w POWER/DISPLAY w
BRIGHTNESS
MENU w POWER/DISPLAY w
CONTRAST
MENU w POWER/DISPLAY w
INDICATORS
MENU w POWER/DISPLAY w
PEAK LEVEL
When the Home Screen is open, press
and hold Fn
MENU w SYSTEM w INFORMATION
w CARD
MENU w SYSTEM w INFORMATION
w FIRMWARE
MENU w SYSTEM w INFORMATION
w FILE
Fn w FILE INFORMATION
Fn w FILE INFORMATION
MENU w REC SETTING w XRI