Preparation; Powering The Unit; Inserting Sd Cards; Hold Function For Preventing Accidental Operation - Tascam DR-100MK 3 Bedienungsanleitung

Preparation

Powering the unit

8 Using the built-in battery
Charge it before using the unit the first time after
purchase and after it has not been used for a long time.
•
Charging the built-in battery
Charge the built-in battery by using a TASCAM
PS-P520E AC adapter (sold separately) or by using a
USB cable (Type A Micro B) to connect the USB port
on the unit to a computer.
The unit can be used while the battery is charging.
AC outlet
Micro B
TASCAM PS-P520E (sold separately)
USB plug
You can check the recharging status of the built-in
batteries with the color of the CHG (charge)
indicator.
Lit orange: charging
Lit green: charging complete
8
TASCAM DR-100MKIII
8 Using AA batteries
Slide the battery compartment cover toward the
1.
bottom of the unit to open it.
Install 2 AA batteries with their ¥ and ^ marks
2.
as shown in the battery compartment.
Close the battery compartment cover.
3.
•
Set the type of batteries used in order to allow
the unit to accurately show the amount of power
remaining and determine whether enough power is
available for proper operation. (By default, this is set
to alkaline batteries.) (See "Quick reference for using
various functions" on page 11.)

Inserting SD cards

Open the SD slot cover.
1.
Insert an SD Card into the slot as shown in the
2.
illustration until it clicks into place.
Close the SD card slot cover.
3.
CAUTION
• SD cards that meet SD, SDHC or SDXC standards
can be used with this unit.
• A list of SD cards that have been confirmed to
work with this unit can be found on the TEAC
Global Site (http://teac-global.com/).
HOLD function for preventing
accidental operation
You can slide the HOLD switch to LEVEL or ALL to
enable the hold function that prevents accidental
operation.
ALL: operations of the input level knob and all
buttons are ignored
LEVEL: Operations of the input level knob are
ignored
OFF: hold function is off

Turning the unit on

Confirm that the HOLD switch is set to OFF, and press
down the (power) button until the screen appears.
The Home Screen appears after the unit starts up.
Turning the unit off (putting it in
standby)
Press the (power) button until the screen becomes
blank.
NOTE
• You cannot turn the unit off (put it in standby)
when it is recording or in recording standby.
• The automatic power saving function will turn
the power off when the unit is stopped. (See
"Quick reference for using various functions" on
page 11.)

Selecting the language

The first time you turn the unit on after purchasing
it, the LANGUAGE screen will open. You can set the
language used on this screen.
LCD screen (LANGUAGE screen)
Turn the wheel to move the cursor and select the
1.
language.
Options
ENGLISH: use English
日本語 : use Japanese
FRANÇAIS: use French
ESPAÑOL: use Spanish
DEUTSCH: use German
ITALIANO: use Italian
After making the selection, press the ENTER/
2.
MARK button to confirm it.
NOTE
You can change this setting with the SYSTEM
screen LANGUAGE item. (See "Quick reference for
using various functions" on page 11.)