Function Menu List - Tascam DR-100MK 3 Bedienungsanleitung

Menu item
INFORMATION
DATE/TIME
FILE NAME
FILE No.RESET
SYSTEM REMOTE
LANGUAGE
INITIALIZE
MEDIA FORMAT
USB STORAGE

Function menu list

•
When the Home Screen is open and the unit is stopped, paused, playing back, or in recording standby, press the Fn
button to open the FUNCTION screen.
The function shown depends on the state of the unit when the Fn button is pressed.
Menu item
CHANGE PROTECT
FILE DELETE
DIVIDE
Stopped, paused or
LOOP PLAY
playing back
VSA PLAY
MS DECODE
FILE INFORMATION
LOW CUT
Recording standby
LEVEL CONTROL
MS DECODE
•
When a file or folder is selected on the Browse Screen, press the Fn button to open the FOLDER MENU or FILE MENU
screen.
Menu item
FILE INFORMATION
FILE DELETE
File selected on Browse
Screen
CHANGE PROTECT
CLR ALL MARKS
ALL FILES DELETE
File not selected on
Browse Screen
FOLDER DELETE
14
TASCAM DR-100MKIII
Function
Shows a variety of information.
Set the date and time
Set the file name format.
Reset the file number
Make connected remote control settings
Set the language shown on the display
Restore factory default settings
Format the SD card
Switch to USB mass storage device mode
Function
Change protection for the selected file
Delete the selected file
Divide the selected file
Make loop playback settings
Make VSA playback settings
Set the mid-side decoding function
Show file information for the selected file
Set the low-cut filter
Set the level control function
Set the mid-side decoding function
Function
Show file information for the selected file
Delete the selected file
Change the protection status of the selected file
Delete all marks in the selected file
Delete all files in the selected folder
Delete the selected folder