Shutting Down; Connecting Monitoring Devices And Headphones; Basic Menu Operation Procedures; Menu Structure - Tascam DR-44WL Bedienungsanleitung

Shutting down

While the unit is turned on, slide the HOLD/
switch of the left side panel in the
direction and, when
TASCAM DR-44WL
appears, release the switch.
shutting down
The power turns off in a few seconds.
Connecting monitoring devices
and headphones
To listen with headphones, connect them to the
LINE OUT jack.
To listen with an external monitoring system
(powered monitor speakers or an amplifier and
speakers), connect it to the /LINE OUT jack.
Headphones Powered monitor speakers
an amplifier and speakers
Basic menu operation
procedures
Press the MENU button to open the
1.
screen.
/
Use the wheel to select (highlight) one of the
2.
menu items, and then press the ENTER/MARK
button to go to the desired setting screen.
Use the wheel to select (highlight) an item to
3.
set.
Press the ENTER/MARK button or / button
4.
to move the cursor to the right and highlight
the setting value.
Use the wheel to change the setting.
5.
When setting a different item in the same
6.
menu, press the ENTER/MARK button or .
to move the cursor to the left.
or
Repeat Steps 3. to 6. as necessary to set other
7.
items.
When finished, press the 8/HOME button to
8.
return to the Home Screen.

Menu structure

MENU
MODE
REC SETTING
AUTO FUNCTION
BROWSE
(only when the 4CH mode
is selected)
SONG
(only when the MTR mode
is selected)
TOOLS
REVERB
POWER/DISPLAY
SYSTEM

Recording

Recording Screen

MENU
The screen below is shown when the unit is in the
recording standby state or while recording is in
progress.
Recording screen in the 4 CH mode
Recording screen in the MTR mode
Display of the DUAL REC function on/off
1
status (4CH mode only)
No display: DUAL REC function off
Select recording or
playback mode
Display of reverb on/off status
2
Set for recording
Icon
Blank
Convenient
functions for
recorded files
Operate files and
3 Phantom power supply display
folders in the SD
Blank: No phantom power supply
card
Set other convenient
Recorder operation status display
4
functions
These icons show the recorder operation status.
Set reverb effects
Indicator Meaning
09
Set the power
supply and the
0
display
Display of the setting status of the PRE REC
5
System settings of
or Auto REC function (4CH mode only)
the unit
When the PRE REC function is
icon shown.
When the AUTO REC function is
icon is shown.
File name/song name display
6
The file name that will automatically be given
to a recorded file is shown.
When there are multiple files in the 4CH mode,
only the format portion of the file names and
the basic number of the recording files are
displayed. When a single file is recorded, its
name is shown.
When the MTR mode is selected, the name of
an opened song is shown.
: DUAL REC function on
On/off status
Reverb off
Reverb on
(Recording with the effector on)
Reverb on
(SEND status)
: 48 V phantom power supplied
: 24 V phantom power supplied
Recording in standby or recording
paused
Recording in progress
, the
ON
, the
ON
TASCAM DR-44WL
7