Recalling Preset Stations; Using Bluetooth; Pairing Bluetooth With Your Mobile Phone; Playing Music From Your Mobile Phone - PERFECTPRO SLIM-3 Bedienungsanleitung

Recalling preset stations

1. Press the ON/OFF button to turn on the radio.
2. Press the SOURCE button to select the desired waveband.
3. Briefly Press the required PRESET button, the display will show, e.g. "P1", in the
first line.

USING BLUETOOTH

Pairing Bluetooth with your mobile phone

1. Press the ON/OFF button to turn on the radio.
2. Select Bluetooth mode by pressing the SOURCE button.
3. The LCD display will show "Not connected" when radio is not yet paired with your
mobile phone. Also the blue Bluetooth LED on the front panel will be blinking at
this moment.
4. In your mobile phone open the Setting menu and select Bluetooth, then select "PP
Slim 3" in the Bluetooth devices list (Bluetooth pairing instructions may vary per
type of mobile phone, please check your mobile phone manual).
5. When Bluetooth pairing is successful, the LCD display will show "Bluetooth
Connected" in the 1st line, and your mobile's name in the 2nd line for about 2
seconds.
The blue Bluetooth LED on the front panel will stop blinking when the radio is
connected to a mobile phone.
6. After all, the LCD display will show the connected mobile phone's name in the 1st
line to indicate the connected device to the radio.

Playing music from your mobile phone

1. Press the ON/OFF button to turn on the radio.
2. Select Bluetooth mode by pressing the SOURCE button.
3. Start playing music by using the media players in the paired mobile phone.
4. Playback can be controlled from the mobile phone or by pressing the REWIND,
FAST FORWARD, and PLAY/PAUSE buttons (preset buttons 3, 4 and 5) on the
radio.
5. After the music playback starts, the name of the song will be displayed in the LCD.
15
Display modes – Bluetooth
In Bluetooth mode, the radio can display a range of information of the current playing
music on the display. Press the INFO button to cycle through the various types.
a. Title Displays scrolling song's name of the current playback music.
b. Artist Displays the artist's name of the current playback music.
c. Album Displays the album name of current playback music.
d. Status Displays the playback status. E.g. playing or stopped.
e. Music info Displays the music format and sampling rate of current playing
song. E.g. "AAC" is the format of the song; "44100Hz" is the
sampling frequency of the song.
f. Time & date Displays the current time and date.

Restart Bluetooth pairing

The Bluetooth function can be set to operate in different ways as below:
1. In Bluetooth mode, press the MENU button to enter the system setting.
2. Rotate the TUNING/SEEK knob to select "Disconnect BT" options, and press the
TUNING/SEEK knob to select the setting.
3. The LCD display will show "Please wait" for a few seconds in order to disconnect
the current connection with the mobile phone device.
4. The LCD display will show "Not connected" and the radio's Bluetooth is free for any
mobile phone connection as it is in discoverable mode now.
The blue Bluetooth LED on the front panel will be blinking at this moment.
Note: "Disconnect BT" is the option that forcing the Bluetooth of this radio to disconnect
from your mobile phone and entering the "discoverable mode". This is the way to allow
the Bluetooth pairing to another device. If no new device is paired, the Bluetooth will
automatically try to connect to the last device when it is switched off and on again.
The Auto-Power management function will be activated in Bluetooth mode. If there is no
signal* from Bluetooth for a period of over 15 minutes, the radio will automatically switch
to standby mode. Pressing the ON/OFF button will wake up the unit.
* Also when the incoming signal from the external device is too low and cannot be
detected for a period of over 15 minutes by the Auto-Power management, the radio will
switch to standby mode.
To prevent this raise the output level of the external device enough to be detected.
GB
16